SmartScope for MAC

Everything you need for the development of your electronics devices. The SmartScope software and Lab-Nation hardware make this the best oscilloscope available. It runs on all major platforms, including Windows, OSX Linux, Linux, Android, iOS (with wifi bridge). Connect the SmartScope with almost any device!

The oscilloscope software supports hardware and provides the following capabilities.

Oscilloscope Functions

• Bandwidth30 MHz -3dB point
• Sample rate2 x 100 MS/s
• Channels2
• Maximal pre-trigger position16x full scale
• Maximal post-trigger positionFullscale
• Max full voltage scale10V/div +-35V input range
• Min full voltage scale20mV/div
• Analog input range-35V, +35V
• Maximum input peak-to–peak40V
• Signal couplingAC/DC
• Precision8 bit
• Input impedance1 MOhm // 10 pF
• Waverforms200 waveforms/s
• Data delay to hostSample depthUpto 4 million samples per channel
• External trigger

Logic Analyzer

• Input channels8
• Input impedance100kOhm // 2pF - GND
• Sample rate100 MS/s
• Logic level1,8 V-5,0 V
• Diode protectionBidirectional
• Input data buffer4 million samples
• Waveforms200 waveforms/s
• Data delay to hostProtocol decoders I2C, SPI, UART, I2S integrated User extensible

Analog Output - Wave Generator

• Channels1
• Data rateUp to 50 MS/s
• Output level0 - 3,3 V Opamp driven
• Output buffer Up to 2048 samples
• Maximum slew rate30ns/V
• Step13 mV

Wave Generator - Digital Output

• Channels4
• Data rateUp to 100 MS/s
• Selectable output level3,3 V, or 5 V
• Output buffer-Up to 2048 samples
• Protected diode

Version 0.15.2.0:

• Fix for blank screen at startup